Skip to main content
Add Me To Your Mailing List
Share This Page
Share this page on Facebook
Share this page on Linkedin
Share this page on Twitter
Hovernaut of the Year
Switch To Threaded View
Return to Forum
2003 UH-18SP with Trailer for $4,500
4/28/2018 9:01 AM
Craft has been sold - Thanks to the Club and Billy / UH guys.. It's been a blast !
4/9/2018 8:10 AM
Yes, still available..
4/4/2018 6:23 PM
Is the craft still available?
3/4/2018 6:03 PM
Yes, still for sale as of 3/4/18. You can call my cellphone at 248-563-8529. Thanks, Darvis
1/30/2018 8:13 PM
Please call me at 256-374-8216 if still for sale.
9/28/2017 12:59 PM
I just heard about your hovercraft today, so it may be late notice for you to bring it to the Brighton races I am attending this weekend. I am interested and would like to speak to you about the hovercraft. My phone number is 815-914-3541, my name is Jim Pendergrass. I look forward to hearing from you.
9/7/2017 2:44 PM
Universal Hovercraft made hull and ducts.
Ram Performance (Clinton Ohio) upgraded engine in 2005.
XTreme (Montrose) built custom aluminum trailer, new decking in 2015.
Still hovers, but haven't used in last couple of years. Can bring to Brighton races weekend of September 30th.
Hull Material ("System 3" Epoxy)
Composite of 1/8"plywood, 3" extruded foam (insulation), fiberglass cloth, all bonded together with 2 part polyurethane epoxy and vacuum cured.
6" in middle, 9" along sides
Hull Dimensions (length X width)
18' 6" X 7' 9"
Thrust Propeller - 2 blade (material/size/pitch)
Pine / 60" / 53 Leading edge of propeller blades have epoxied fiberglass cloth (tried Kevlar) with 3M polyurethane tape (used on helicopter blades).
Lift Fan - 4 blade (material/size/pitch)
Pine / 34" / 28 *Pine flexes & deforms upon impact with rocks etc. without disintegrating.
Weight / Center of Gravity
950 lbs / 7' 10" from rear (no driver)
1000 lbs (4 - 5 adults)
70 mph (surface / weight / wind dependent).
60 knots airspeed (less speed w/less weight)
< 5' for safety and FAA regulations.
Wing Span / Spars
24' / (2) 3" round 6061 aluminum wing spars (one at rear & one at 108" from rear)
Wing & Skirt/bag Material
Vinyl covered nylon (18oz./yd
) glued w/ HH-66. Wing material has pockets sewn in front & back to slide over wing spars.
Subaru E-81 (1986 GL Wagon).
Engine Size (Liters / Cubic Inches)
1.8 L / 110 cu.in.
Engine Horsepower / Weight
120 HP / 160 lbs.
Engine Details (built by RAM Performance Ltd.)
Remanufactured w/ light weight cast pistons, matched combustion chambers, ported cylinder heads w/ larger S.S. valves, HP cam, custom dual intake w/ crossover and 2-into-1 exhaust manifold into glass pack muffler.
2 VM-34 Mikuni carburetors, fed by a Coast Guard approved 12v fuel pump.
12 gallons (2 - 6 gallon tanks).
Return to Forum